1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
LD320
LVDT Linear Position Sensors with AC Output
Models In Stock
- Being replaced by the new LD320A Series
- 2.5 to 75 mm travel
- <0.2% Linearity
- Rugged 19 mm Dia. Stainless Steel Body
LD320
From
C$
643.54
Models In Stock
Product Overview
- Cable Length 2 m
- Cable Type PFA
- Core Material Nickel-iron
- Electrical Output AC
- Enclosure Ratings IP67
- Housing Material 300 Series Stainless Steel
- Operating Temperature, Max 120 °C
- Operating Temperature, Min -40 °C
- Shock Drop Testing: 1 m (3') onto hard surface;Topple Testing: 10 times each end onto hard surface
- Storage Temperature, Max 120 °C
- Storage Temperature, Min -40 °C
- Supply Voltage 3 ± 1 Vrms, 5 ± 0.5 kHz
- Temperature Coefficient 0.015% of FS/°C
- Vibration 10 to 50 Hz: 1 to 10 g rms linear amplitude;50 Hz to 1 kHz: 10 g rms amplitude
- Zero/Balance Error <0.5% FSO
The LD320 series has been replaced by the new and improved LD320A series. Many ranges are in stock, available for immediate shipment.
The LD320 Series displacement sensors have a stainless steel body with improved IP67-rated sealing, coupled with new polymer guides with rigid carriers. These transducers are accurate and reliable, especially in wet and corrosive conditions. An unusually large bore-to-core clearance is maintained throughout the range, even on transducers fitted with on-board signal conditioning. This makes installation easier and helps prevent misalignment.SPECIFICATIONS
Linearity: <0.2% FSO
Residual Voltage at Null Position: <0.5% FSO
Storage Temp: -40 to 120°C (-40 to 248°F)
Operating Temp: -40 to 120°C (-40 to 248°F)
Protection Rating: IP67
Vibration (Sinusoidal Frequency):
10 to 50 Hz: 1 to 10 g rms linear
50 Hz to 1 kHz: 10 g rms linear
Shock:
Drop Testing: 1 m (3') onto hard surface
Topple Testing: 10 times each end onto hard surface
Case Material: 300 SS
Cable: PFA, 2 m (6') long
Core Material: Nickel-Iron
